Share:


SN Series DC-to-AC Pure Sine Wave Power Inverter (300W–4000W)



DC-to-AC Pure Sine Wave Power Inverter for Reliable Power Conversion

The SN Series Pure Sine Wave Static Power Inverter converts DC input into single-phase AC output, with documented power ratings from 300W to 4000W and model-specific DC input voltages.

The SN Series is a range of DC-to-AC static power inverters using CPU-controlled high-frequency PWM technology. The original specifications describe pure sine wave AC output and efficiency greater than 88%.

Eight inverter configurations are documented, with rated powers of 300W, 600W, 1000W, 2000W and 4000W. Available nominal DC input voltages include 12V, 24V, 48V and 110V, depending on the selected model.

The manufacturer describes the series for telecommunications and low-electrical-noise applications. Each published model includes operating status indicators, electrical protection functions and forced cooling.

SN Series Pure Sine Wave Static Power Inverter
Original Pure Sine Wave Inverter Product Image
AVAILABLE MODELS

SN Series Pure Sine Wave Inverter Models

The following model ratings and input voltages are taken from the eight original technical specification sheets.

Model Rated Power DC Input AC Output
SN300-12 300W 12V 230V
SN300-24 300W 24V 230V
SN600-12 600W 12V 230V
SN600-48 600W 48V 230V
SN1000-12 1000W 12V 230V
SN1000-48 1000W 48V 240V*
SN2000-12 2000W 12V 230V
SN4000-110 4000W 110V 230V

*The SN1000-48 is specified at 240VAC with selectable 220V/230V settings. Other models also have model-dependent voltage tolerances and frequency specifications. Refer to the corresponding original technical sheet.

PRODUCT FEATURES

Published Inverter Features

01

Pure Sine Wave Output

The original specification sheets list pure sine wave output with total harmonic distortion of no more than 3% under linear-load conditions.

02

CPU-Controlled PWM Technology

The manufacturer describes the inverter design as using CPU-controlled high-frequency pulse width modulation technology.

03

Electrical Protection

Published protection functions include overload, short-circuit and input voltage protection. Additional protection details are specified individually for each model.

04

Status Indication and Cooling

The documented models provide LED operating and fault indications, together with forced cooling.

TECHNICAL DETAILS

SN Series Technical Overview

These are the characteristics stated across the published model specifications. Power and voltage ratings should be checked separately for each inverter.

Product Type Pure Sine Wave Static Power Inverter
Conversion DC Input to Single-Phase AC Output
Rated Power Range 300W–4000W
Documented DC Input Options 12V / 24V / 48V / 110V
Output Waveform Pure Sine Wave
Output Distortion ≤3% THD (Linear Load)
Efficiency Greater Than 88%
Indication Operating Status and Fault LEDs
Cooling Forced Cooling
Ambient Operating Temperature -10°C to +50°C
Humidity 0–95%, Non-Condensing
MODEL SELECTION

Selecting an SN Series Inverter

SN Series models differ in rated power, DC input voltage, surge capacity and AC output settings. Review the original specification sheet for the exact inverter model before making a selection.

The required DC source, connected AC load and model-specific protection requirements should be checked against the published electrical ratings.

ORIGINAL PRODUCT IMAGES

SN Series Product Gallery

These are the additional original product images supplied with the manufacturer's listing.

ORIGINAL TECHNICAL DOCUMENTATION

SN Series Model Specification Sheets

The eight original technical specification images are retained for checking individual model ratings, electrical characteristics, dimensions and protection information.

SN300-12 — 300W / 12V DC
Original SN300-12 300W pure sine wave inverter specification
SN300-24 — 300W / 24V DC
Original SN300-24 300W pure sine wave inverter specification
SN600-12 — 600W / 12V DC
Original SN600-12 600W pure sine wave inverter specification
SN600-48 — 600W / 48V DC
Original SN600-48 600W pure sine wave inverter specification
SN1000-12 — 1000W / 12V DC
Original SN1000-12 1000W pure sine wave inverter specification
SN1000-48 — 1000W / 48V DC
Original SN1000-48 1000W pure sine wave inverter specification
SN2000-12 — 2000W / 12V DC
Original SN2000-12 2000W pure sine wave inverter specification
SN4000-110 — 4000W / 110V DC
Original SN4000-110 4000W pure sine wave inverter specification
POWER INVERTER ENQUIRY

Enquire About the SN Series Power Inverter

Provide your required DC input voltage, AC output requirements and load rating to enquire about a suitable SN Series inverter model.



 Inquiry - SN Series DC-to-AC Pure Sine Wave Power Inverter (300W–4000W)